Printer friendly page

Industrial Fans

The fan is one of the most important parts in any air-blast cooling system (oil coolers, radiators, cooling towers, etc.), a good quality fan can mean the difference between a system working or not working. We at Allied Heat Transfer International cut, assemble and balance industrial fans. They are world leaders in the manufacture of axial fans designed for many different applications.

Using our design selection programs we are able to size a fan (from Ø200 mm to 12 metres in diameter) to suit most applications including cooling towers, oil coolers, radiators, engine cooling, evaporators, condensers, etc. Through the use of our fan sizing programs coupled with our experience of fan installations we are able to select the most efficient fan from our range for the required duty, this means that the fan will have the lowest noise output and lowest power consumption to move the required amount of air.

Having a good quality fan does not mean that it will work properly, it’s just as important for the fan to be installed correctly. We will advise on the ideal fan installation based on your requirements, taking into account the effects it will have on the performance of the fan.

We carry a large range of fan parts in stock, including blades, retainers and hubs. From this we are able to supply replacement parts as necessary, or manufacture a complete fan assembly. When a fan is manufactured it is vitally important for the fan to be balanced, use of an unbalanced fan can result in premature wear of parts, break-downs or worse. Each fan we build is precisely balanced in house to ensure that when installed it will not cause excessive wearing on any other part in the system.

Fan type : Fixed pitch - variable pitch.

Fan Blade Types:

• PPG - Glass reinforced Polypropylene
• PAG - Glass reinforced Polyamide
• PAGI - Glass reinforced Polyamide, industrial quality
• PAGAS - Antistatic version of Glass reinforced Polyamide
• PAGST - Vibration stabilised version of Glass reinforced Polyamide
• AL - Aluminium

We carry a range of parallel shaft hubs to suit common sizes, as well as taper lock hubs that are interchangeable with all of our fans. If we do not have a suitable mounting setup in stock then we are able to manufacture one to allow our fan to fit your setup.